Automatic Plate Parting and Brushing Machine
A Brusher parter machine with a maximum speed of processing of 100 panels / min. with the following features :
Most efficent vaccum pick-up feeder with 710 mm ling magazine for plates (With two separate geared motor drives of 3ph 0.5 HP on either side of vaccum feeder to align lug-stack to match the pick-up & to make – up the non-parallel movement of stack if any.)
Electric control panel for PLC controlled Operation.
Main drive geared motor 3ph – 1hp controlled through VED. plate stacking station for take-off of brushed & parted plates.
Suitably placed sensors toaviod / detect double feed. “Pride Industries” are master of “Plate Brushing & Parting machine” Whether it is.
a) An Automotive Plate.
b) Multiple Panel Motor Cycle plate
c) Multiple Panel VRLA Plate
d) Large Size thick VRL Plate
e) Thin Lead – Calcium plate.
Optional feature : Cleaning station for : for sides / edges of finish / cut plates – A Stack of plates cleaned along edges by four motors mounted with suitable wire brushes.
Machine Specification :
a) Capacity : Max 125 plates / minute
b) Power : Three phase x 415 V x 50 Hz.
c) Control panel : PLC & VFD
d) Pick-up : Suction type with heavy duty Vacuum pump provided.
e) Stacking width : Max – 305 mm (Pasted plate width min – 185 mm to double panel) This is standard width, size can vary as per customer requirement.
f) Power Required : Four Motors – 1/2 HP
Two Motors – 1/2 HP
One Motors – 1 HP
One – 5HP
g) Machine size : Length – 4500mm
width: 1000 mm
Height: 1300mm
h) Machine Weight : 1700 kgs.
